Wooden pallet christmas tree instructions

Pallet Tree Instructions. Pallets can easily be found and it's so simple to create a tree shape from them using a saw. You are also helping to protect the environment by up-cycling found objects as well as exercising your creativity. You can decorate it paint, sparkling stars or even just a string of lights. Wood Christmas Tree Apr 28, 2016 - Using pallet wood and cedar shingles you can make this Pallet Wood Christmas tree. Easy step by step instructions. No cedar shingles? Wood Shims work too! Cut 3 pieces of your cross brace for the back, slightly shorter than the width of the back, and nail into place. Make sure you nail a couple of nails into each board. Great time to use a nail gun if you have one. Time to start cutting the tree. Lay out Christmas tree design On the pallet wood backing, you can start laying out your tree starting from the bottom. The thinner side of the slat is always at the top. A dry fit helps to design the pallet wood Christmas tree. Continue to stack shingle pieces to form Christmas Tree Continue to lay out the pieces until your tree is nice and full. We stuck it back outside, and sprayed the heck out of it with basic bug spray. Then I let it dry. After about an hour, I brought it back in, and painted it with white paint I had on hand. Any paint will due. I purposely painted it lightly, so some of the wood would show through. While it was drying, I collected the decorations.