Ps3 hook up instructions

Watch this: Connect a computer to your PS3. 4:24. Set up your PS3. Step 1: Make sure your PS3 is connected to the same network (via Ethernet or wireless) as your computer. You can check your Answer (1 of 3): There are three ways to connect xt your PS3 to you TV: 1. If your TV is an HDTV, connect one end of the HDMI cable to the back of the PS3, and connect the other end to the available HDMI port. On the TV remote, select the HDMI input and you're good to go. 2. If your TV has an RC 1 Turn on the PlayStation 3. Press the Power button on the front of the console. When connecting a new controller, the PS3 cannot be in Standby mode. 2 Connect the controller's charging cable to the controller. You'll find the charging port for the cable, which is a mini-USB cable, in the front of the controller's housing (between the triggers). 3 Connect Your BD Remote to Your PS3 From the "Settings" menu, scroll down to the tenth option, " Accessory Settings ." You'll find it between the "Power Save Settings" and "Printer Settings" options. Press the "X" button on your PS3 Controller to enter the "Accessory Settings" menu. Inside the menu, you'll notice several options. Settings > Network Settings > Internet Connection Settings (wired connection) Internet Connection Settings (wired connection) Set the method for connecting the system to the Internet. When making a wired connection using an Ethernet cable, you can follow the on-screen instructions to automatically select the basic settings. Step # 1. Return to the main menu of your PS3. Head to the "Accessory Settings" menu to access the " Audio Device Settings " menu. Step # 2. Highlight " Input Device " option through pressing the " X " button the controller. At this point, you will have to choose a proper microphone to relay voice chats. Avoid prolonged use of the PS3™ system. Take a 15-minute break during each hour of play. Avoid playing when you are tired or need sleep. About the lithium coin memory back-up battery The lithium coin memory back-up battery inside this product contains Perchlorate. The following statement is required by the State of California, USA: Part 1 Setting up: Download Article 1 Power on the system. Hit the power button, or turn on the controller and wait for it to load. 2 Tab to settings. Scroll to the left until you've reached a toolbox icon named settings. 3 Scroll to network settings. A picture of a globe and wrench named network settings. Press X to bring up the menu. 4 Connect an Ethernet cable (sold separately) to the PS3TMsystem. Select (Settings) (Network Settings) [Internet Connection Settings]. Select [Easy]. Check that the settings are correct, and then save the settings. Using PSNSM Wireless router (access point) Router System front Insert the disc with the label side facing up. Press the power button to turn on the PS3TM system. If video is not displayed, turn off the PS3TM system, and then turn it on again by pressing the power button for at least five seconds (until the system beeps a second time). Press the PS button on the wireless controller. Follow the on-screen instructions to perform the initial setup.