Luceco solar light instructions

Light up your pathway, garden shed or front garden with ease. The LED Solar Guardian Wall Light provides a lovely neutral white light and features a motion sensor with a 2-6m range. Movement will boost the light to full power when motion is detected, and will go into a standby mode when there is no motion. immerse the light in water. • Avoid facing the PIR towards sources of heat such as boiler outlets as this will affect the performance of the PIR Wall Mounting: Powersmith Ltd, BA22 8RT, UK Please retain this information for future reference. Instruction manual LED Slimline Security Light 5333V / 7482V / 5625V / 4273V / 1. The Luceco Solar Guardian wall light with PIR motion sensor is constructed from polycarbonate, and delivers a lumen output of 400 and is IP44 weather and dustproof rated. The solar wall light requires no need for wiring and will help lower the energy use in your home and supports sustainable living. View product details. Saved to Project List. Solar wall lights look great attached to your wall or fence to create focused lighting. Solar wall light will simply charge its battery up during the day using energy from the sun and automatically light up during the night, making it a simple and easy solution. The exterior solar wall light from Luceco is powered solely by its solar panel and has a beam angle of 120⁰ and is combined with high performing LED chips to beautifully illuminate your driveways, gardens and porches. With the built in PIR motion sensor, the solar wall light only illuminates when you need it to so great to use in driveways to assist with parking in the dark or use in the If after a period of time the illumination from the LED lights looks dimmed, place Solar Guardian back in direct sunlight for 6 hours and the battery will fully charge returning illumination back to full power WORKING MODES Select by pressing the power button until desired mode: MODE A Installed them at the weekend and I seem to have a problem with 3 of the lights. For some reason two of the lights have a massive delay after the switch is turned on (standard on/off) and one of them flickering but at 10% brightness, like the LED is failing or not getting enough power. It is perfect for outdoor entrance areas, balconies, paths, decorative garden lighting and sheds/outhouses. It automatically turns onto a standby glow mode when it gets dark and boosts to full power when an occupancy is detected. There is no wiring and it is easy and simple to install. Colour temp - 4000k. Lumens - 180. Wattage - 1.5. Luceco SOLAR Guardian 1.5W PIR Wall Light IP65 Black 220lm. By Luceco Product code: 55970 Pack size: Each. 10% Off. £15.98 was £17.98 Exc. VAT £13.32. ★★★★★ ★★★★★. Catalogue page 749. Store the light for a couple of days in a hot water cupboard to dry out the light. Reassemble the light, double-checking the batteries are well seated. Give the light a day or two to charge and then turn the light on at night. It's also worth checking with the manufacturer.