Life brand digital thermometer model 1551 instructions

The 1523 Reference Thermometer is a versatile single-channel thermometer that measures, graphs and records three sensor types with one tool. Support for PRTs/RTDs, thermocouples, and thermistors provides flexibility to choose the right probe for the job. The 1524 Reference Thermometers help you do twice the work in half the time. Step 2 - Power on the Thermometer Most digital thermometers only come equipped with one button. In order to change the units on the device, you will need to make sure the thermometer is powered on. If the device is working properly, then you should be able to change the units of measurements with little hassle. Of course many other industries have applications that require an easy-to-use, stable and portable reference thermometer and the "Stik" thermometer is the perfect solution. The Fluke-Hart Scientific 1551A and 1552A "Stik" thermometers include a user-configurable stability/trend indicator that lets users know when temperature is stable enough to Fluke Calibration 1551A-20-DL Intrinsically Safe "Stik" Thermometer with Fixed RTD and Datalog, -50 °C to 160 °C, 6.35mm x 508mm (1/4 in. x 20 in.) - at the Test Equipment Depot Brand: Fluke Calibration: Model No: 1551A-20-DL: MPN: 3936055: Our Model No: 1551A20DL: Condition: NEW: UPC: 095969583961: Thermometer Probe and Digital HOW TO USE. 1. Disinfect the probe with ethyl (rubbing) alcohol before using. 2. Depress the ON/OFF button. The display will read or. EC Representative :with FeverTeller flashing (Red→Orange→Green). 3. Release the power switch and the display will show L°C(L°F) with °C(°F) flashing. Fluke Calibration 1551A-9-DL Intrinsically Safe "Stik" Thermometer with Fixed RTD and Datalog, -50 °C to 160 °C, 4.8mm x 229mm (3/16 in. x 9 in.) - at the Test Equipment Depot Brand: Fluke Calibration: Model No: 1551A-9-DL: MPN: 3936019: Our Model No: 1551A9DL: Condition: NEW: UPC: 095969583923: Thermometer Probe and Digital Readout this manual carefully before use. Please be sure to keep this manual. rossmax.com Introduction How to Use 1. Push the On/Off button by the display window. The display will read for 2 seconds and beep sound will be heard. 2. Releasing the on/off button, last measured temperature will be shown for about 2 seconds. Then shows the self-test temperature The Non-Contact Infrared Thermometer-IR 200 provides accurate and instant temperature readings without any physical contact. Simply scan the patient's forehead and receive an instant temperature result displayed on the LED screen. Its long-lasting battery life produces up to 100,000 readings before a battery replacement is necessary. Press and Hold start button until you see "Lo" and "C" in the screen and then press the start button again. You will see "C" change to "F" or "F" to "C". Failed to get answers. With the thermometer OFF, hold down the "mode" button until the hourglass and F or C shows up. Continue mashing Mode then press the Power button and it will toggle F or 1551A Ex Thermometer, Fixed PRT, -80 °C to 300 °C, 6.35 mm x 305 mm (1/4 in x 12 in) Finally, a digital substitute for your mercury-in-glass thermometers! Accurate and repeatable to ± 0.05 °C over its full range, the 1551A/1552A "Stik" Thermometer is the new "gold standard" of industrial temperature calibration. these instructions will cause severe damage to your unit and void your