Kantech kt-400 programming manual

This equipment, KT-400 Ethernet Four-Door Controller Model KT-400-EU, shall be used installed and used within an environment that provides the pollution degree max 2 and over voltages categor y II NON HAZARDOUS LOCATIONS, INDOOR only. The equipment is FIXED and PERMANENTLY CONNECTED and is designed to be installed by Service Persons only; Configure and manage four doors using a simple embedded web browser - no software to purchase and install (Standalone Mode, KT-400rev1)Intuitive configuratio ADI #:KW-EK400 Model #: EK-400 Name: Kantech EK-400 Access Control Expansion Kit. Supports four readers and expand inputs, outputs, and relays with the addition of expansion modules. Onboard Ethernet 128-bit AES-encrypted communication with the EntraPass system ensures a high degree of network security. Control the occupancy level in a defined 4. Verify the IP address with the KT-Finder, see page 32. 5. Put back JP2 and JP3 jumpers. 6. Configure the KT-400 with the KT-Finder, see page 32. Figure 13: KT-400 Factory Default Steps. AC Power LED DC Power LED Status Indicators ON ON • The AC power is present. • The DC power level is sufficient for all DC operations such as the Cabinetdimensions:KT-1 Fromwallsurface(WidthxHeightxThickness)3.4"x 5.125"x1.81"(2.4"overallthickness) Cabinetdimensions:KT-1-PCB 4.78''x5.436''x1.863'' Weight:KT-1 10.75ounces(305g) CabinetWeight:KT-1-PCB13.93ounces(395g) Readertypes Wiegand,proximity,ABAClockandData,barcode,mag-netic,integratedkeypad,smartcardandothers Download Kantech Entrapass will sometimes glitch and take you a long time to try different solutions. LoginAsk is here to help you access Download Kantech Entrapass quickly and handle each specific case you encounter. Furthermore, you can find the "Troubleshooting Login Issues" section which can answer your unresolved problems and equip you Kantech Entrapass will sometimes glitch and take you a long time to try different solutions. LoginAsk is here to help you access Kantech Entrapass quickly and handle each specific case you encounter. Furthermore, you can find the "Troubleshooting Login Issues" section which can answer your unresolved problems and equip you with a lot of The KT-400 four-door controller is a secure and easy-to-use networked access control solution with support for eight Kantech ioProx XSF entry/exit readers. The KT-400 has an on-board Ethernet port that connects to existing network infrastructure and leverages the benefits of IP-based systems. Combine KT-400 with EntraPass security management Description. KT-400 is an Ethernet-ready four-door controller that provides 128-bit AES encrypted communication with the EntraPass Security Software and is a highly secure solution for any security-conscious business. KT-400 can easily be integrated into an existin g EntraPass system with other Kantech controllers (KT-1 and KT-300), or basic The KT-400 Controller is an ethernet-ready four-door controller that provides encrypted communication with EntraPASS Security Software and is a highly secure solution for any security-conscious business. — 4 Door / 4 Reader Controller. — 4 Lock Outputs / 12vDC. — Ethernet-ready, Encrypted. — 4 Relay Outputs / 16 Input Points for Monitoring. The Kantech KT-400 is an Ethernet-ready four-door controller that provides 128-bit AES encrypted communication with the EntraPass system and is a highly secure solution for any security-conscious business. The KT-400 can easily