Iso 180/1a pdf

Izod Impact, Notched (ISO) 14.0 kJ/m² 6.66 ft-lb/in² ISO 180/1A Izod Impact, Unnotched (ISO) NB NB ISO 180/1C Charpy Impact Unnotched NB NB ISO 179 1/2 lookpolymers.com email : sales@lookpolymers.com. Charpy Impact, Notched 1.50 J/cm² 7.14 ft-lb/in² ISO 179 Density ISO 1183 1.04 g/cm³ Mold Shrink, Linear Flow (3.2mm) ISO 294-4 0.4 - 0.8 % Impact Notched Izod Impact (23°C) ISO 180/1A 21.0 kJ/m² Notched Charpy Impact (23°C) ISO 179/1eA 21.0 kJ/m² Mechanical Tensile Strength @ Yield (50mm/min) ISO 527 52 MPa Tensile Modulus (1mm/min) ISO 527 2,440 MPa Flexural Strength (2mm/min) ISO 178 79 MPa 1 TECHNICAL DATA SHEET TECHNICAL DATA SHEET D PRODUCT CODE : PRODUCT DESCRIPTION : PA66, 30% GLASS FIBER REINFORCED, HYDROLYSIS STABILIZED, BLACK tisan.com.tr PHONE: +90 216 429 36 65 FAX: +90 216 312 14 78 DOC NO: PP01/F04 ISS DATE: 20.06.2008 REV NO: 5 REV DATE: 13.08.2014 1 P H Y S I C A L ISO 4180:2009 establishes general rules to be used for the compilation of performance test schedules for complete, filled transport packages intended for use within any distribution system except for the packages used for dangerous goods. ASTM D1238 ISO 527-2 ISO 178 ASTM D790A ASTM D256A ISO 180/1A ISO 75-2/Bf ASTM D523 Values given are typical and should not be interpreted as specifications. Data generated by or on behalf of ExxonMobil Chemical. Test methods are based on the ASTM and/or ISO standards. Use Achieve™ Advanced PP to challenge reality in appliance appeal. Charpy Impact ISO 179. Charpy Impact is a single point test that measures a materials resistance to impact from a swinging pendulum. Charpy impact is defined as the kinetic energy needed to initiate fracture and continue the fracture until the specimen is broken. The values obtained can be used for quality control or to differentiate general Notched Izod Impact Strength (23°C) 4 kJ/m 2 ISO 180/1A Note: The data above is provided in good faith and represents typical properties based on our current knowledge and experience. Product properties may be changed without notice. These properties are provided as a guide and should not be construed as binding Heat: Vicat B/120 in °C (ISO 306) Impact: Izod Notched at 23°C in kJ/m 2 (ISO 180/1A) Flammability: Flame class at mm thickness (UL94) Flow: MVR at 260°C/5.00kg in cm 3/10min (ISO1133) Flow*: MVR at 260°C/2.16kg in cm 3/10min (ISO1133) n.t.: not tested GRADE Heat • Impact Flammability • Flow Melt Flow Rate 2.16kg@230°C ISO 1133 g/10min 25 25 40 40 Flexural Modulus @23°C ISO 178 MPa 1100 1100 1100 1100 Tensile Strength @yield @23°C ISO 527-1,-2 MPa 28 28 28 28 Izod Notched Impact Strength @23°C ISO 180/ 1A kJ/m² 5.5 5.5 5 5 Izod Notched Impact Strength @0°C ISO 180/ 1A kJ/m² 2.8 2.8 2.8 2.8 Haze 1mm Plate, injection@200°C Izod Impact, notched 80*10*4 +23°C 22 kJ/m² ISO 180/1A Izod Impact, notched 80*10*4 -30°C 8 kJ/m² ISO 180/1A Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 26 kJ/m² ISO 179/1eA Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm 9 kJ/m² ISO 179/1eA THERMAL Vicat Softening Temp, Rate B/50 99 °C ASTM D 1525 HDT, 0.45 MPa, 3.2 mm, unannealed 94 °C specimens. Type 1A may also be used for compression-moulded specimens. For the use of proportionally scaled miniaturized specimens, see Annex A and/or ISO 20753. NOTE 1 At 4 mm thickness, specimen types 1A and 1B are identical to the multipurpose test specimens according to ISO 3167, types A and B, respectively, and to types A1 and A2 of ISO 20753. The standards ISO 527-1 (general principles) and ISO 527-2 (test conditions for mol